TÉLÉCHARGER VIEWER AUTOVIEW

You must install both a keyboard and mouse on the local ports or the keyboard will not initialize properly. If the Console menu interface password is enabled, you must exit the Console Main menu so that the next user will be prompted with the Username and Password login screen. For instance, in Figure 3. Click Setup – Flag to open the Flag dialog box shown in Figure 3. Permet d ouvrir les boîtes de dialogue, de sélectionner ou d activer les options et d exécuter les actions en combinaison avec les lettres soulignées ou autres caractères désignés. Repeat for additional target devices.

Nom: viewer autoview
Format: Fichier D’archive
Système d’exploitation: Windows, Mac, Android, iOS
Licence: Usage Personnel Seulement
Taille: 63.68 MBytes

Console Main Menu 2. Move up one buffer line. The adjustments display immediately in the Video Viewer window. Closes current dialog box and returns to previous one. Cette séquence de commande ne fonctionne que si l utilisateur est connecté à un équipement cible. This option changes the screen s normal text color.

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference vewer radio communications.

Operation of this equipment in a residential area aautoview likely to cause harmful vieewer in viewre case the user will be required to correct the interference at his own expense. All other marks are the property of their respective owners Avocent Corporation. All rights reserved D. Dangerous Voltage This symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

Protective Grounding Terminal This symbol indicates a terminal which must be connected to earth ground prior to making any other connections to the equipment.

Local Port Operation Basic Operations Flash Upgrades Appendix B: Using Serial IQ Modules Technical Specifications Appendix E: Position Flag Figure 3. Active Directory – Define Groups Manual Video Adjust Dialog Box Console Main Menu Figure 6. Autovidw for Figure Table 2. Descriptions for Figure Table 3. Main Dialog Box Functions Table 3. Descriptions for Figure Table 4.

viewer autoview

Viewing Appliance Information Table 4. Allowed Operations by Access Level Table 4. Viewing Appliance Information Table 5. Descriptions for Figure Table 5. Descriptions for Figure Table B. Sun Key Emulation Table E.

Comparer les visionneuse DWG | DWG TrueView, A et AutoCAD Mobile | Autodesk

Reduce cable bulk With server densities continually increasing, cable bulk remains a major concern for network administrators. This allows a higher server density while providing greater airflow and cooling capacity. The IQ module and IAC are powered directly from the target device and provides Keep Alive functionality when auoview switch is not powered.

  TÉLÉCHARGER WEBMAX CAMERA GRATUIT POUR WINDOWS 7

It provides VT terminal emulation, break suppression and port history in a compact, convenient module. No special software or drivers are required on the attached, or client, computers. Descriptions for Figure 1. Product Overview 3 Table 1.

Unpack the switch viewef verify that all components are present and in good condition. Make all hardware connections between the power source, switch, target devices, the Ethernet and the optional modem connection. Turn on the power and verify that all connections are autovew. Make the appropriate mouse setting adjustments. Descriptions follow in Table Figure 2. Installation 7 Table 2. Descriptions for Figure 2. As a result, Avocent does not recommend this configuration.

DWG TrueView et autres visionneuse de fichiers CAO

Avocent recommends that IP addresses be reserved for each switch and that they remain static while the switches are connected to the network. Rack mounting safety considerations Rack Loading – Overloading or uneven loading of racks may result in fiewer or rack failure, causing damage to equipment and possible personal injury. Stabilize racks in a permanent location before loading begins.

Mount components beginning at the bottom of the rack, then work to the top. Do not exceed your rack load rating. Power Considerations – Connect only to the power source specified on the unit. Autlview multiple electrical components are installed in a rack, viwwer that the total component power ratings do not exceed circuit capabilities. Overloaded power sources and extension cords present fire and shock hazards.

If installed in a closed rack assembly, the operating temperature of the rack environment may be greater than room ambient.

viewer autoview

Use care not to exceed the rated maximum ambient temperature of the switch. Install the equipment in the rack so that the amount of airflow required for safe operation of the equipment is not compromised.

Maintain vewer earthing of rack mounted equipment. Pay particular attention to supply connections other than direct connections to the branch circuit for example, use of power strips. To install the rack mounting bracket: Tighten the screws securely. Installation 9 Figure 2. Plug the other end into an appropriate AC wall outlet. If the building has 3-phase AC power, ensure that the computer and monitor are on the same phase. For best results, they should be on the same circuit.

To reduce the risk of autoiew shock or damage to your equipment: The grounding plug is an important safety feature. Disconnect the power from the switch by unplugging the power cord from either the electrical outlet or the appliance. You must install both a keyboard and mouse on the local ports or the keyboard will not initialize properly. Plug a compatible IQ module into the appropriate ports on the back of the target server.

Plug one end of a UTP patch cable 4-pair, up to 30 meters into the selected port and plug the other end into the RJ connector of the IQ module. When connecting a Sun IQ module, you must use a multi-sync monitor in the local port to accommodate Sun computers that support both VGA and sync-on-green or composite sync. After about one minute, the switch completes initialization and displays the OSCAR graphical user interface Free tag on the local port monitor.

  TÉLÉCHARGER SDL IMAGE 1.2

Point your web browser to the default IP address to access the device. Enter the appropriate addressing information for your network. To connect a serial IQ module to a serial device: Connect the power supply to the power connector on your serial IQ module. The cable vieweer can be used to turn on to four serial IQ modules from a single power supply.

Connect the serial IQ module power supply to a grounded AC wall outlet. Turn on your serial device. See Chapter 6 for detailed instructions. See Chapter 4 for detailed instructions on using the on-board web interface for switching. Consult the manual for your firewall for specific port forwarding instructions. Open a web browser and enter the external IP address of the firewall. Ethernet connection LEDS The green LED, labeled Link, illuminates when a valid connection to the network is established at the maximum supported rate and blinks when there is activity on the port.

The amber LED illuminates when you are communicating at a slower rate when using an Ethernet connection. If neither LED is illuminated, connection speed is at a rate of 10 Mbps. An amber LED illuminates when that port is selected. The LEDs blink during a firmware upgrade.

The serial IQ module prevents a serial break from the attached device if the module loses power. However, a user can generate a serial break with the attached device by pressing Alt-B after accessing the Terminal Applications menu. To ensure that the local mouse fiewer and remote cursor display remain in sync, mouse acceleration must be set to none for all user accounts accessing a remote system through a KVM switch.

Mouse acceleration must also be set to none on every remote system. Special cursors should not be used and cursor visibility options, such as pointer trails, Ctrl key cursor location animations, cursor shadowing and cursor hiding, should also be turned off.

This port enables you to connect a keyboard, monitor and mouse to the switch for direct access. The Port column indicates the port to which a target device is connected. Selecting a target device Use the Main dialog box to autoviww a target device.

To select a target device: Double-click the target device name, EID or port number. If you are denied access to the target device, a message will appear saying that you can not view that particular target device. To select the previous target device: Press Print Screen and then Backspace. This key combination toggles you between the previous and current connections.

To disconnect from a target device: